Mast-R-Lift & Table & Fence

"Mast-R-Lift & Table & Fence" -- Let Mast-R-Lift take your routing to a whole new level!Now you can change bits and make fine adjustments from the top of your table for easier, safer routing.Shown with optional leg set.

Mast-R-Lift & Table & Fence
Mast-R-Lift & Table & Fence
If "Mast-R-Lift & Table & Fence" isn't exactly what you wanted, you can find what you need by entering your desired item below:
Search Rockler.com's Extensive Woodworking Catalog

Search from over
9000 products!
Details about Mast-R-Lift & Table & Fence:   Porter-Cable 7518 Router PLUS Mast-R-Lift, Table and Fence Mast-R-LiftModel 7518 Router3-1/4 Peak HP, Variable SpeedPackage includes Porter-Cable 7518 router and our Mast-R-Lift, Table and fence system that offers fine adjustments from the top of your table for easier, safer routing. Put this router motor in the Mast-R-Lift and you're ready to rout! Motor has electronic five-speed with soft start.(22676) Porter-Cable 7518 Router & Mast-R-Lift Package featuresFive-speed router with soft start maintains constant speed under load3-1/4 Peak HPAuto-release collet system ends frozen bitsUnique design puts bottom bearing closer to work for minimum bit run-out and vibrationWith 1/2" colletNow change bits and adjust the depth of cut n increments less tha 1/128", all from the top of the table! Designed to accomodate Porter-Cable 7518 motor.Mast-R-Lift is precision-engineered to within .002" tolerance and CNC-machined from 1" solid aluminum to eliminate bending and sagging. Built-in insert adjusters allow for snugging the lift in your table for a perfect fit, while the built-in leveling system will not wear into the table's recessed opening Plate measures 9-1/4" x 11-3/4" x 3/8". Adjustments are made with a drop-in speed handle that's elevated from the table. Fence has 32" long anodized aluminum angle that's machined to within .010"Includes bit safety guard Mast-R-Lift Plate (60146) is precision-engineered to within .002'' tolerance and CNC-machined from 1'' solid aluminum to eliminate bending and sagging. The plate is 9-1/4'' x 11-3/4'' x 3/8'' thick and it comes with a 1-1/2'' insert. The opening in the plate without the insert is 3-1/2'' diameter. Tab-Loc Inserts (24686) Our 4-piece locking insert kit includes 1/4'', 1/2'' and 1-1/4'' inserts for template bushings plus a 2 -1/2'' insert. Sold separately.(Mast-R-Lift comes with a 1-1/2" insert.) Phenolic resin.One rotation of the handle equals 1/16''so you can make both super-fine and major adjustments quickly and easily.Built-in insert adjusters allow for snugging Mast-R-Lift into your table for an absolutely perfect fit, while the built-in leveling system will not wear into your table's recessed opening.Other features that ensure smooth operation include a carriage that rides on four SAE 841 sintered bronze bearings within two ground and polished guide shafts. Adjustments are made with a drop-in speed handle thatís elevated from the table for safety. Changing bits with Mast-R-Lift has never been easier!All your router bits are changed from the top of the table-the quickest and safest way to change bits. Eliminator Chuck (22705)Adjust bits with one hand!No more knicking your fingers and hands with the clumsy two-wrench system.(See image on right.)This chuck accepts 1/2" shank router bits.Adapter available for 1/4'' bits. (90497)Installation Template (60804)Fit your Mast-R-Lift perfectly with our 1/2'' thick MDF template!Designed to work with our 1/2'' pattern bit (33536) or other 1/2'' pattern bits (shims may be required).Mount with double-faced tape. (50492) Mast-R-Lift is designed to accommodate Porter-Cable 75182 motors (sold separately). The Mast-R-Lift cannot be adapted for Plunge Routers.Adapter rings (sold separately) are available for PC 690, PC 890, Bosch 1617/1618 EVS Router DeWalt 610 RouterMakita 1100-01 RouterMast-R-Lift TableThe Mast-R-Lift Router Table is a large 24 by 32'' table made of 1-1/8'' MDF (Medium Density Fiberboard) and surfaced with melamine on both sides. Includes an aluminum miter track.The precision fence features a 32'' long anodized aluminum angle that's machined straight and flat for exact cuts. It includes two 16'' melamine faces that can be adjusted to minimize the gap around the router bit. The faces include a T-slot for universal positioning of all accessories. The fence attaches to the table with a simple T-bolt system and comes with a bit safety guard. Optional AccessoriesOptional router table leg accessories available: Steel Router Table Leg Set (4 Legs, 8 Stretchers) & Pine Router Table Leg Set.  Steel Router Table Leg Stand Pine Router Table Leg Set

Click Here for more details and the current price on the vendor's website for their Mast-R-Lift & Table & Fence.

Product:
Name: Mast-R-Lift & Table & Fence
Main category: Rockler's Exclusive Product Line

This Mast-R-Lift & Table & Fence product is carried by Rockler, "the woodworking superstore." They're a family-run store for woodworkers, established in 1954, with the tools, wood, and materials to help your completed project be a source of pride to you and your family.


Click Here for my list of similar items.

Or Here: Woodworking Tools and Supplies for the main category list.

To Previous Similar Item | To Next Similar Item



Website Copyright © www.mikeogara.net 2003, 2004 -- all rights reserved.