Miller Dowel System

"Miller Dowel System" -- Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine! Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction.

Miller Dowel System
Miller Dowel System
If "Miller Dowel System" isn't exactly what you wanted, you can find what you need by entering your desired item below:
Search Rockler.com's Extensive Woodworking Catalog

Search from over
9000 products!
Details about Miller Dowel System:  1) Stepped Drill Bit - Bores clean holes and prevents boards from separating as you drill.2) Easier Installation - Solid wood dowel drops about 2/3 way into hole before you hammer.3) Stronger Bond - Each step traps the glue and has a larger surface area for bonding.The Miller Dowel is perfect for use in a wide variety of wood joining and fastening applications, such as furniture, decks/docks, stairs and hand railings, cabinets, windows and doors, and more! Helps you avoid the problems associated with nails and screws, such as wood rot, metal corrosion and rust, nail pops, and splitting of the grain. Choose from 1x or 2x Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Available in two sizes: 1x for boards up to 1" thick, and 2x for boards up to 1-3/4" thick. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also available in birch, oak, cherry and walnut.Joining wood with wooden fasteners avoids the problems with nails and screws, such as Wood rot, of which even a minor amount compromises joint strength,1) Metal corrosion and rust 2) Dangerous "Nail Pops" or "Shiners" 3) Splitting of the grain. Peg Construction traditionally involves the difficult task of driving a pin dowel into a pilot hole that is just as tight at the top as it is at the bottom. Not only do you have to use a hammer from the very beginning, but it only gets tougher the deeper you get!The MILLER Dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, and it is easier to tap in!Another advantage of having the dowel inserted so far through the top board is that the pilot hole does not have a chance to misalign. The hole for a traditional dowel must be perfectly matched up so the dowel can enter the second piece of wood without problems.The MILLER Dowel is already well into the second piece of wood before you even reach for your hammer!The MILLER Dowel has exceptional holding strength because the shoulder between the widest and second widest sections gets lodged in the top board. This produces a capping effect like the head on a screw or a nail.This dowel has excellent adhesion as glue remains all along the MILLER Dowel’s length, settling under each shoulder, instead of being forced down to the bottom of the hole or sheared off at the top.Many woodworkers appreciate the decorative appearance of the pegged or “Shaker” look. Since our dowels can be stained prior to insertion, it simple to enhance the contrast for both light and dark woods. Why use plugs to cover countersunk screws? Using plugs involves drilling a pilot hole, screwing in a fastener, then gluing and inserting the plug. Why not just skip a step by using a MILLER Dowel? Plus, you won't worry about the plugs falling out and disappearing. Our fit remains tight. Unlike nails or screws, wooden dowels are naturally flexible and dampen vibration. There is no compression of the surrounding wood, which would loosen the fit. The original intent for our product was to be a safety fastener. Injuries and damages caused by exposed nail/screw heads are prevented by using MILLER Dowels.MILLER Dowels introduce a new joinery technique that can be used instead of difficult, expensive, and/or very time consuming methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.In this method, pieces of wood to be joined are simply glued and aligned. Once cured, the glue eliminates the need for a brace.Pilot holes are then drilled, and the dowels can then be inserted for structural support.Not only does this method guarantee perfectly flush joinery, but it takes 25% of the time!

Click Here for more details and the current price on the vendor's website for their Miller Dowel System.

Product:
Name: Miller Dowel System
Main category: Dowels, Plugs and Dowel Pins

This Miller Dowel System product is carried by Rockler, "the woodworking superstore." They're a family-run store for woodworkers, established in 1954, with the tools, wood, and materials to help your completed project be a source of pride to you and your family.


Click Here for my list of similar items.

Or Here: Woodworking Tools and Supplies for the main category list.

To Previous Similar Item | To Next Similar Item



Website Copyright © www.mikeogara.net 2003, 2004 -- all rights reserved.